The Very Stubborn Mystery of Intermittent Data Collection
How we solved the case of the ghost in the machine room
This 👆 is Eddie Pavrette, our service lead and project manager for remote metering. Eddie’s one of those guys who’s seen and done it all when it comes to metering. Troubleshooting is his specialty.
So when a new data collection panel started being flaky, Eddie went right over to see what was going on.
A data collector is exactly what it sounds like: It collects data from the remote meters and then sends it via an internet connection to a data cloud. Once the data hits the cloud, utiliVisor picks it up and brings it into our software for cleaning and analysis.
(We “scrub” the data before importing it into our system to ensure it's organized correctly, so no one accidentally compares kW to amps between meters. Think of it as pre-gaming our analysis.)
The Mystery in the Machine Room
In this case, as in almost all others, the data collection panel was located in one of the building’s machine rooms. Eddie went in the room with all his testing equipment to begin the troubleshooting process. Power to the panel? Check. Connections to meters? Check. Connection to router? Check. Router communicating properly. Check. And so on.
Unable to find anything wrong, Eddie reported his findings to the client and went to the next job.
But the satisfaction didn’t last.
Shortly thereafter, the client called to say that data collection was still flaky. It would be on sometimes, sometimes for brief periods, sometimes for long periods. Never always on.
Eddie went back to try to find what he’d missed. There were still no problems to be found, and the client and Eddie were both able to confirm that data collection system was working correctly. Maybe the problem was related to a tenant build-out elsewhere in the building?
You’ve probably already guessed what’s coming next. The cycle continued, Groundhog Day–style. Another day, another call about the system still being on the fritz. Eddie continued to stop by, brainstorming with the property manager what else to try even though he could never reproduce and had never witnessed the problem.
The Culprit Revealed
So what was causing the mysterious outages? It turns out that the one thing Eddie did differently on that last trip into the machine room was… not turn on the light.
Yes, it was the light switch all along (points to those who guessed). Although we'd been told the panel was powered by a dedicated circuit breaker, it was actually powered by the light switch. So every time the staff or Eddie or anyone went into that windowless room to work, they turned on the light as they entered, which turned on the collection system.
And when people left the room, they (usually) turned the light switch off again, which also happened to turn off the power to the data collector.
Why was this tricky to diagnose? In this active new building, many people went into the machine room each day, sometimes leaving the light on for a while because they knew they’d be in and out frequently. Sometimes, folks must have forgotten to turn the light off, because the panel had been powered all night. There was no pattern to the outages.
Sheer stubbornness is what solved this problem (as it solves so many).
So here’s our PSA on installing data collectors: Always power your panels from the circuit breaker, never a switch. The headache you save will be your own. (Also ours, but mostly yours.)
After all that back and forth, what’s Eddie’s take on this particular panel problem?
“It’s funny now,” he says.
Done Being Ghosted by Other Service Providers?
We have an entire service team dedicated to solving tricky submetering issues like this one. Reach out to have one of our NYC experts come to your site to exorcise the ghosts out of your operations.
You Might Like
Related articles from our blog:
About utiliVisor
Your tenant submetering and energy plant optimization services are an essential part of your operation. You deserve personalized energy insights from a team that knows buildings from the inside out, applies IoT technology and is energized by providing you with accurate data and energy optimization insights. When you need experience, expertise, and service, you need utiliVisor on your side, delivering consistent energy and cost-saving strategies to you. What more can our 45+ years of experience and historical data do for you? Call utiliVisor at 212-260-4800 or visit utilivisor.com